99-04 Miata Fiberglass Air Dam
90-98 Miata Air Dam/Splitter

Miata Air Dam Mounting Brackets:
Weld on T-Brackets Set
         $35.00/ per set
This bracket welds to the frame and
allows you to bolt  the air dam from underneath
Strut Support Bracket
How we mount our air dams:
At first we bolted it to the bumper but quickly learned that if you go off track you do a lot of damage to the
front of the car so we had to come up with a better way. 
Mike has designed a weld to the frame T-Bracket for mounting the air dams.  You can also use the Strut
Support bracket to help support the front of the early air dam.

ISCR Weight: 16 LBS with molded in headlight covers
Stock ALUMINUM Weight: 18 LBS without headlight covers
To Place an order please call 863-324-4539 or email your name, address and phone number to Mike@iscracing.net.  We will call with a total and for payment information.    Thank you.
When mounting on a IT car, we attach a 3/8 plywood
bottom to the airdam. We then use the mounting
brackets below to attach it to the chassis.
We have now started drill and tap holes in the chassis to mount the supports.
              Plastic Air Dam
   We had several clients asking about a
   flat air dam for NASA events. Here it is!
Bottom is re-enforced with Aluminum Strip
Miata Fender Flares
  $220 per set of 4