MVC-011SMiata Fender Flares

    $220.00 per set of 4

(about 1″ in the rear
and 1.5″ in the front)

 99-04 Miata Fiberglass Air Dam

When mounting on a IT car, we attach a 3/8 plywood bottom to the air dam.  We then use the mounting brackets
shown below to attach it to the chassis.  $225.00

99 airdam99 airdam mount

 90-98 Miata Air Dam/Splitter EarlyAirdam


Plastic Air DamMVC-008S

We had several clients asking about a flat air dam for NASA events. Here it is!  Bottom is re-enforced with Aluminum Strip.


Miata Air Dam Mounting BracketsMiataAirdamBracket

Weld on T-Brackets Set.  This bracket welds to the frame and allows you to bolt the air dam from underneath.   $35.00/per set

Strut Support BracketMiataSupportBracket


 How we mount our air dams: At first we bolted it to the bumper but quickly learned that if you go off track you do a lot of damage to the front of the car so we had to come up with a better way.  Mike has designed a weld to the frame T-Bracket for mounting the air dams. You can also use the Strut Support Bracket to help support the front of the early air dam. We have now started drill and tap holes in the chassis to mount the supports.

MiataWeldBracket MiataWeldBracket1SupportBracketInstall


1999 - 1004 Miata Fiberglass Air Dam $225.00
1999 – 1004 Miata Fiberglass Air Dam

ISCR Weight: 16 LBS with molded in headlight covers Stock ALUMINUM Weight: 18 LBS without headlight covers


 To place an order please call 863-324-4539 or email your name, address and phone number to We will call with a total and for payment information. Thank you.